|
The new D-Locks
are designed for commercial, institutional and industrial use in
facilities such as schools, hospitals and factories where a long life of
dependable operation must be combined with a high degree of resistance
to physical abuse. A full range of functions is available to meet all
application needs. In addition, the popular functions of all lever
designs are available in Vandlgard, where the lever is free-wheeling in
the locked position to resist more forceful attacks.
The new D-Lock
has been designed to provide:
-
Outstanding
Performance - Meets BHMA standards at 3,000,000 cycles, nearly 4
times the industry standard
-
Increased
Strength - up to 5 times the industry benchmark
-
Code
Compliance - meets ADA and fire life and safety codes
-
Simplified
Installation - Installs in less than two minutes
-
More
Aesthetic Options - More lever and finish designs including the new
Omega lever and satin nickel finish
-
Cost of
Ownership - Significantly reduced cost of ownership over the
lifetime of the lock.
Applications:
Extra heavy duty residential, commercial, institutional, and
industrial applications. Interior and exterior doors for
schools/universities, hospitals/healthcare facilities, offices,
factories, public buildings, religious, retail, and government
facilities.
Certifications: ANSI A156.2, 1996, Series 4000 Grade 1. UL Listed.
Keying:
6-Pin Everest C123 keyway standard with two patented nickel silver keys
per lock. Other keying options available from the factory include master
keying, grand master keying, construction keying, and interchangeable
core. Classic Primus or Everest Primus® cylinders are also available.
The door range is
1 5/8"-2 1/8" standard except for the ND85 which is 1 3/4"-2". The 1 3/8
door thickness requires 2 spacers in order to fit and must be specified
or ordered separately.
Backset: 2
¾" (70 mm) standard. 2 3/8" (60 mm) and 3 ¾" (95 mm) backset latches
available. 5" (127 mm) backset link available.
Exposed Trim:
Levers are pressure cast zinc, plated to match finishes. Roses are solid
brass plated to match finishes.
Warranty:
Seven-year limited warranty for all functions including Vandlgard.
Finishes: 605 - Bright Brass,
606 - Satin Brass, 612 - Satin Bronze, 613 - Oil Rubbed Bronze, 619 -
Satin Nickel, 625 - Bright Chromium Plated, 626 - Satin Chromium Plated
Latches & Strikes: Adjustable
brass or bronze latch faceplates and strikes, furnished in compatible
lock trim finishes.
Latch Bolt: Steel, ½" (12 mm) throw,
deadlocking on keyed and exterior functions. ¾" (19 mm) throw
anti-friction latch available for pairs of fire doors.
Strikes: ANSI curved lip strike 1 ¼"
x 4 7/8" (32 mm x 124 mm), 1 3/16" (30 mm) to center standard. Optional
strikes, lip lengths and ANSI strike box available.
 Standard
Features:
-
Cylindrical lock housing. Cold rolled
steel, corrosion treated for normal atmospheric conditions
-
Key removable outside knobs for easy
cylinder replacement
-
Solid brass 6-pin cylinders
-
No exposed mounting screws
-
Exceeds 800,000 cycle ANSI Grade 1
requirements by nearly 4 times (3,000,000 cycles)
Electrified Locks: D-Series
locks are available for electrically locking and unlocking controls for
high security and fire safety applications. They are UL Listed and rated
for both fire and electrical single point locking on labeled doors.
Refer to the lock function pages for functions and design availability.
Electrical Requirements: 24V AC, .35
amps or 24V DC, .15 amps.
Operating Temperature: Maximum +151
1/2F, Minimum -31 1/2F
|
