COUNTERSUNK PHILLIPS / SQUARE DRIVE WOOD SCREWS

#6 x 1” (3.5 x 25) Galvanized 1200/12K 435 008 1 14 R35 008 1
#6 x 1” (3.5 x 25) Zinc 1200/12K 435 008 2 14 R35 008 2
#6 x 1” (3.5 x 25) Super Black 1200/12K 435 008 3 14 R35 008 3
#8 x 1” (4.2 x 25) Galvanized 1000/10K 435 021 1 14 R35 021 1
#8 x 1” (4.2 x 25) Zinc 1000/10K 435 021 2 14 R35 021 2
#8 x 1” (4.2 x 25) Super Black 1000/10K 435 021 3 14 R35 021 3
#10 x 1 1/2” (4.8 x 30) Galvanized 500/5K 435 032 1 18 R35 032 1
#10 x 1 1/2” (4.8 x 30) Zinc 500/5K 435 032 2 18 R35 032 2
#10 x 1 1/2” (4.8 x 30) Super Black 500/5K 435 032 3 18 R35 032 3
#10 x 2” (4.8 x 50) Galvanized 400/4K 435 034 1 18 R35 034 1
#10 x 2” (4.8 x 50) Zinc 400/4K 435 034 2 18 R35 034 2
#10 x 2” (4.8 x 50) Super Black 400/4K 435 034 3 18 R35 034 3
#12 x 2” (5.5 x 50) Galvanized 300/3K 435 044 1 18 R35 044 1
#12 x 2” (5.5 x 50) Zinc 300/3K 435 044 2 18 R35 044 2
#12 x 2” (5.5 x 50) Super Black 300/3K 435 044 3 18 R35 044 3
#14 x 2 1/2” (6 x 60) Galvanized 200/2k 435 050 1 18 R35 050 1
#14 x 2 1/2” (6 x 60) Zinc 200/2K 435 050 2 18 R35 050 2
#14 x 2 1/2” (6 x 60) Super Black 200/2K 435 050 3 18 R35 050 3

HEXSCREWS

1/4” x 2” (6 x 50) Galvanized 200/2K H06 050 1 18 R06 050 1
1/4” x 2” (6 x 50) Zinc 200/2K H06 050 2 18 R06 050 2
1/4” x 2” (6 x 50) Super Black 200/2K H06 050 3 18 R06 050 3
5/16” x 2” (8 x 50) Galvanized 100/1K H08 050 1 18 R08 050 1
5/16” x 2” (8 x 50) Zinc 100/1K H08 050 2 18 R08 050 2
5/16” x 2” (8 x 50) Super Black 100/1K H08 050 3 18 R08 050 3
5/16” x 3” (8 x 75) Super Black 100/1K H08 075 3 18 R08 075 3
1/4” Hex up to 4” length zinc
5/16” Hex up to 6” length zinc
3/8” Hex up to 8” length zinc
7/16” Hex up to 8” length zinc

CARRIAGE BOLTS

5/16” x 3” (8 x 75) Super Black 200 C08 075 3 2 R08 075 3
3/8” x 3 7/8” (10 x 95) Galvanized 200 C10 090 1 2 R10 090 1
3/8” x 3 7/8” (10 x 95) Super Black 200 C10 090 3 2 R10 090 3
7/16” x 4 1/4” (12 x 110) Galvanized 200 C12 110 1 2 R12 110 1
7/16” x 4 1/4” (12 x 110) Super Black 200 C12 110 3 2 R12 110 3

TRIM HEAD STAR DRIVE .26” Head Diameter

#9 X 1 5/8” Stainless T20 4000 7784-09158
#9 X 2 1/4” Stainless T20 2500 7784-09214
#9 X 2 1/2” Stainless T20 2500 7784-09212
#9 X 3” Stainless T20 2000 7784-09300
305 stainless steel/Less obtrusive with great holding power/Same features as 7789
series but with a .26” Head Diameter/Great for Composite Decking, Rail & Fence.
Available in 1 lb. and 5 lb. jars

305 STAINLESS STEEL STAR DRIVE SCREWS .32”-.38” Head Diameter

#8 x 1 1/4” Stainless T20 9000 7789-08114
#8 x 1 1/2” Stainless T20 6500 7789-08112
#8 X 2” Stainless T20 3500 7789-08200
#9 X 1 5/8” Stainless T25 4000 7789-09158
#9 X 2” Stainless T25 3000 7789-09200
#9 X 2 1/2” Stainless T25 2500 7789-09212
#9 X 3 Stainless T25 2000 7789-09300
#10 X 2 1/2” Stainless T25 2500 7789-10212
#10 X 3” Stainless T25 1500 7789-10300
Type 305 Stainless Steel/Deep Six Lobe Drive/Extra Sharp Type 17 Auger Point/
Deep Wide Sharp Thread. Also available in 1 lb. and 5 lb. jars

WOOD TO STEEL STAR DRIVE SCREWS

10-16 x 1 5/8” .361” T25 #3 7/8” wood to .175 metal 4000 343-10158
12-24 x 2” .396” T25 #4 1 1/8” wood to .210 metal 2000 343-12200
12-24 x 2 1/2” .396” T25 #4 1 1/4” wood to .210 metal 1500 343-12212
14-20 x 2 3/4” .49” T30 #4 1 1/2” wood to .250 metal 1000 343-14234
14-20 x 3 1/4” .49” T30 #4 2”wood to .250 metal 1000 343-14314
Reamer Wings/Shank Slot/Hardened Steel/Zinc Plated/For up to 1/4” thick steel
with no predrilling. Also available in 1 lb. and 5 lb. jars

EXTERIOR TRIM HEAD STAR DRIVE WOOD SCREWS .24” Head Diameter

#9 x 1 5/8” Bronze T20 4000 84289-09158
#9 x 2” Bronze T20 3000 84289-09200
#9 x 2 1/2” Bronze T20 2500 84289-09212
#9 x 3” Bronze T20 2000 84289-09300
ACQ Compatible Coating/Deep, Wide, Sharp Threads/Knurled Shank/Type 17
Auger Point/Hardened Steel. Also available in 1 lb. and 5 lb. jars

EXTERIOR USE STAR DRIVE WOOD SCREWS .32”-.38” Head Diameter

#8 X 1 1/4” Bronze T20 9000 289-08114
#8 X 1 1/2” Bronze T20 6500 289-08112
#8 X 1 3/4” Bronze T20 4000 289-08134
#8 X 2” Bronze T20 3500 289-08200
#8 X 2” Bronze T20 3500 289-08200
#9 X 2” Bronze T25 3000 289-09200
#9 X 2 1/2” Bronze T25 2500 289-09212
#9 X 2 3/4” Bronze T25 2000 289-09234
#9 X 3” Bronze T25 2000 289-09300

#7 X EXTERIOR USE FINISH SCREWS

#7 X 1 5/8” Bronze T10 5500 372-7158
#7 X 2” Bronze T10 4000 372-72
#7 X 2 1/2” Bronze T10 3000 372-7212
#7 X 3” Bronze T10 2500 372-73
Smallest “Star Drive” Trim Head Available/Type 17 Auger Point/Deep, Wide, Sharp Threads/Knurled Shank/Head Treated, Hardened Steel. Also available in 1 lb. and 5 lb. jars

EXTERIOR USE CONSTRUCTION LAG SCREWS 1/4” Nominal, 1/2” Head Dia

1/4” X 1” Bronze T25 2000 2289-14100
1/4” X 1 1/2” Bronze T25 1500 2289-14150
1/4” X 2” Bronze T25 1000 2289-14200
1/4” X 2 1/2” Bronze T25 750 2289-14250
1/4” X 3” Bronze T25 600 2289-14300
Round Washer Head/Extra Sharp Type 17 Auger Point/Deep Sharp Spiral/Hardened Steel. Other sizes available. Also available in 1 lb. and 5 lb. jars

EXTERIOR USE ‘STAR DRIVE’ CABINET SCREWS (Modified Truss Head .412 Head Dia)

#7 X 1 1/4” Bronze T15 4000 2289-7114
#7 X 1 5/8” Bronze T15 3000 2289-7158
#7 X 2” Bronze T15 2000 2289-7200
#7 X 2 1/2” Bronze T15 1500 2289-7212
ACQ Compatible Coating/Extra Sharp Type 17 Auger Point/Washer Head/Deep,
Wide, Sharp Threads/Hardened Steel. Also available in 1 lb. and 5 lb. jars

“STAR DRIVE” BITS

T10 1” & 2”, T15 1” & 2”
T20 1” & 2”, T25 1” & 2”
T30 1”& 2”
Other lengths available

BIT HOLDERS

Quick Release Magnetic Bit Holder 2” QR2
Quick Release Magnetic Bit Holder 3” QR3
C-Ring 1 pc SS Magnetic Bit Holder - For 1” bits only 771-7624-3

HIDDEN DECK FASTENER

black marine grade aluminum 8 3325-2547
Each jar contains 175 Clips, 175 2-1/4” ‘Star Drive’ Screws, 10 2-1/4” Starter &
Finisher Screws, Hard Wood Plugs, 1 T20 X 2 Driver, Instructions
No drilling or glue. ACQ Compatible. When using 5 1/2” wide decking, each jar will
install 100 sq ft of decking on 16” centers or 150 sq ft on 24” centers.

SCRAIL® COLLATED FASTENERS

1 1/2” - 3” Philips or Square strip, plastic galv, electro-galv, see price sheet, or wire coil bright, stainless sheet Bend yield moment meets ASTM F1667-05 standards. Twice as fast as collated screws eight times faster than bulk screws. Use almost anywhere ordinary screws are used. Dramatically increased holding power vs. nails. Easily adjusted, quickly removable. Saves time and labor costs. Engineered for use in most common pneumatic and gas nailers in the market today.

Store Hours

Mon-Fri 9-5

Sat 10-2

Sun Bids

  Handing

  Functions

  General

Flat Rate for Continental U.S.

Shipping $12.75

We accept:

  Click Here